Data/Telecommunication Tools
Ideal Punchmasterâ„¢ II w/66 and 110 Blade 35-485
$118.80 inc. GSTIncludes both 110 and 66 full blades – 110 (cut/no-cut), 66 (cut/no cut)nSpring loaded impact style termination seats and cuts wires with less effortnCushioned end cap and body grip helps to absorb impact forces and reduces operator fatiguenAdjustable high/low actuation setting accommodates termination requirements and user preferencenTurn-Lock™ Style blade holding design keeps blade aligned and secure in the tool
Klein Tools VDV427-014 Punch Down Impact Tool With Krone Blade
$20.95 inc. GSTFor inserting category cable wires into jacks, modules, panels and distribution frames
Includes swing-out combination hook and spudger
Designed for use on Krone blocks and network infrastructure
Lock mechanism by rotating impact lock dial
Sparky Tools STW006 NBN RG6 Torque Wrench
$33.95 inc. GST- Pre set to 30lbs torque.
- Designed for use with 9/16″ RG6 F Type Connectors.
Sparky Tools STW011 NBN RG11 Torque Wrench
$33.95 inc. GST- Pre set to 30lbs torque.
- Designed for use with 9/16″ RG11 F Type Connectors.
TEKTROM FOC125 Fibre Optic Cleaning Pen 1.25mm 800 Cleans
$21.00 inc. GSTUp to
800 cleans for 1.25mm
Easy push mechanism
Cleans and frees any contaminants
Tested in Australia
Genuine TEKTROM
TEKTROM FOC250 Fibre Optic Cleaning Pen 2.5mm 800 Cleans
$21.00 inc. GSTUp to
800 cleans for 2.5mm
Easy push mechanism
Cleans and frees any contaminants
Tested in Australia
Genuine TEKTROM
TEKTROM FOT100 Fibre Optic Tester Pen Visual Fault Locator 30mW
$28.00 inc. GSTRobust
pen shaped Visual Fault Locator
30mW output power
650nM wavelength
2.5mm connector
Tested in Australia
Genuine TEKTROM
TEKTROM PDTG Punch Down Tool Grey Krone Type ISGM MDF
$9.80 inc. GSTThe
TEKTROM TEK-PDTGÂ Impact Punch Down
Tool is used for inserting wires into sockets, patch panels or outlets.
Blades precisely trim and insert wire. This convenient tool is the only thing
you need to add, change or remove wires from connections.
• Constructive punch down tool, makes network installation
trouble-free
• Universal scissors cut a variety of cable types, including 26 AWG to 20
AWG and type 1 foam-insulated conductors
• Can be used on unshielded or shielded twisted pair cables to 110/
keystone jacks
Tested in Australia
Genuine TEKTROM
TEKTROM PDTKB Punch Down Tool Blue Krone Type ISGM MDF
$12.73 inc. GSTThe
TEKTROM TEK-PTTKB is a Popular Punch down set for telecommunication
industry.
Design for putting wires into sockets, patch panels and
outlet.
Tested in Australia
Genuine TEKTROM
TEKTROM PDTKR Punch Down Tool Red Krone Type ISGM MDF
$12.73 inc. GSTThe
TEKTROM TEK-PDTKR is a Popular Punch down set for telecommunication
industry.
Design for putting wires into sockets, patch panels and outlet.
Specification for MDF 5000, 2000,1000,and 71.
Tested in Australia
Genuine TEKTROM
TEKTROM PDTP Punch Down Tool NBN Telstra Pouyet IDC
$15.27 inc. GSTThe
TEKTROM TEK-PDTP is 1. Industry standard, internationally
accepted
2. For Pouyet STG or 3M
Module
3. Hook and Spudger tools are built into the handle
Use the hook to remove wires from any style block or to help trace
wires.
Use the spudger to remove the cross-connect module from the
mounting bracket.
4. All blades are interchangeable and reversible. Blade is easy to
exchange.
 Tested in Australia
Genuine TEKTROM
TEKTROM PDTQ Punch Down Tool ISGM HFC Quante SID
$19.60 inc. GSTThe
TEKTROM TEK-PDTQ is Used by Telstra/ISGM and other telecom technicians.
Quante termination tool with red handle is being used on Telstra pillar.
This has proven very handy and being used by all Telstra techs.
Quante SID system
Quante tool quante SID – C tool network tool.
Quante SID insertion tool quante ID 3000 punching tool Quante MDF insertion
tool.
Tested in Australia
Genuine TEKTROM